Mixing resin
The mixing of resin and hardener has a decisive influence on the quality of the rehabilitation.
Only when resin and hardener are mixed in the correct ratio and homogeneously, the cured liner will achieve the desired static properties. When mixing, special care must be taken to ensure that no air is introduced into the resin. Air bubbles in the resin can lead to blowholes and leaks. To avoid this, it is advisable to use a slow-running, double blade mixer, which mixes the resin from bottom to top.
Resin mixing unit Twin 1800
Powerful double helix resin mixer
with soft start and infinitely variable speed control for bubble-free mixing of resin and hardener. The Quick-Adapter and the ergonomic handle with integrated controls allow safe and effortless working.
TECHNICAL DATA:
Voltage: 230 V – 50 Hz
Output: 1800 Watt
Mixing volume: up to 90 litres
Mixing paddle: Ø 220 x H 570 mm
Speed regulation: infinitely variable
Protective insulation: yes
Protection class: IP20
2-speed gearbox:
Speed I: 0 – 450 rpm
Speed II: 0 – 790 rpm
Net weight: 7,5 kg
Dimensions LxWxH: 590 x 320 x 250 mm
Double helix mixing paddle
Replacement whisk for resin mixing device Twin 1800
Material: galvanized steel
Mixing paddle: Ø 220 x H 570 m
Liner impregnation
E-Roller
mobile electric impregnation plant up to DN 300
E-Roller 450
Weight: 19.4 kg
Dimensions: 650x200x360mm
Capacity: max. DN 150
E-Roller 600
Weight: 21.6 kg
Dimensions: 790x200x360mm
Capacity: max. DN 300
TECHNICAL DATA:
• 2 counter-rotating driven rollers with grip coating
• Infinitely variable distance adjustment with digital display
• Adjustable speed with direction switch and foot switch
• Quick-release table attachment for simple
• Safety limit pressure between rollers, safety covers in both rollers
+ Emergency stop
• 100-240 V / 50-60 Hz / 2.1 A
Inversion process
lineTEC INOXDRUM 700 Light
the lightweight stainless steel universal drum
TECHNICAL DATA:
• Material stainless steel
• Weight: 55 kg
• Connections: Compressed air; water inlet Drum axis, outlet in the Floor with level indicator
• Included: manometer, control unit, large opening with sight glass
• Application: DN 50 – DN 200
Note:
All lineTEC drums are equipped with the new lineTEC UltraSoft tension strap.
Preparing and finishing
FIXER 10
Cleaning, preparation and opening of pipes
TECHNICAL DATA:
• Electric Motor 240 V / 50 Hz / 12A with safety clutch
• Max. Grinding speed 2250 rpm
• 23.5 meter 10mm shaft
• Direction switch + Speed control + Foot switch
• Dimensions: 120x45x80cm
• Weight: 56 kg
• puncture-proof wheels Ø 400 mm
Note:
We offer various accessories for the FIXER 10. Please feel free to contact us! We will be glad to assist you!
