lineTEC rehabilitation system for domestic pipes & house connections DN 70-200 (2.75″-8″)

The majority of underground pipes were laid in the area of private or commercial properties. They are used to drain waste water and storm water to the main sewers.
In many cases, the pipes are completely or partially built over, so that the static load-bearing capacity must also be taken into account during rehabilitation. Small pipe diameters from DN 70 to DN 200 (2,75”-8”), bends up to 90° and changing pipe dimensions also present a great challenge.

The lineTEC rehabilitation system was developed to meet these requirements.
The outstanding quality and the suitability were confirmed by the good results in the IKT Product Test, the DIBt approval and numerous other international approvals.

null
null
 

lineTEC ProFlexS

lineTEC ProFlex

The liner for domestic pipes and Inhouse rehabilitation

• DN 70 – DN 250
• Flexible Hightex Fiber
• up to 90° bends
•  2  dimensional changes
• Good longitudinal stability
• Wall thickness 4.5 mm (ProFlex) / 6 mm (ProFlex XT = Extra Thick)
• Hot curing with water (up to 70°C) and steam*

*with suitable calibration hose.

lineTEC ProFlex S

lineTEC ProFlex S / S XT

The steam-tight liner

• DN 100 – DN 250
• Needle felt with PU-Foil
• up to 45° bends
• Good longitudinal stability
• Wall thickness 5 mm(S), 6 mm (ProFlexS XT = Extra Thick)
• Hot curing with water or steam up to 70°C

Resin

lineTEC EP 70 resin + 70 HT hardener

Application: Inhouse and Domestic Pipe Rehabilitation with higher thermal load

DIBt: Z-42. 3-530
Mixing ration: 100/20
Processing time: 55 Min (15°C)
Curing time: 20°C 27 h / 55° 150 min. / 70° 50 min.*
HDT: 93,5°C

*When installing the liner please note the curing times in the
installation manual.

Calibration

lineTEC Calibration hose lila

For bends and dimensional changes*

• 46 – 200 mm 1.8’ – 8’
• Extra flexible PVC coated nylon fabric, welded, temperature resistance up to 50°C
• Up to 0.5 bar

* Use the calibration hose in the size of the biggest pipe dimension.

lineTEC Calibration hose light blue

For bends and dimensional changes*

• 100 – 200 mm 4’ – 8 ‘
• Flexible PVC coated nylon fabric, welded
• Temperature resistance up to 50°C, up to 0.5 bar

*Use the calibration hose in the size of the biggest pipe dimension.

lineTEC Calibration hose orange

For higher temperatures

• 100 – 250 mm 4’ – 10‘
• PVC coated Nylon
• welded and sewed
• temperature resistance up to 70°C, up to 1 bar

Installation Aid

lineTEC Preliner HDPE

Against pushing ground water

  • 100 – 600 mm 4 – 24’
  • HDPE Foil 0.1 mm
  • Temperature resistance up to 80°C

lineTEC Stützkappe weiß