lineTEC InHouse-rehabilitaion
DN 50 – 200 (2″-8″)

When renovating defective pipes inside buildings, special requirements apply. For example, the cured liner must resist a heat-distortion temperature (HDT) of ≥ 93 °C according to DIN 75-2 and fulfill the building material class B2 according to DIN 4102 for fire protection.

lineTEC offers a range of liners and resins for in-house rehabilitation for nominal diameter from DN 50 to DN 200 (2” to 8”), bends up to 90° and changing diameter.

These liners and resins meet all requirements, are DIBt-approved and have successfully passed the thermal shock test with more than 1000 cycles.

null
lineTEC Inhouse System DIBt Z-42.3-530

lineTec Flex

lineTec Flex

lineTEC Flex

Extra flexible liner for Inhouse rehabilitation

• Extra flexible Knittex Polyester with PUR-coating
• Available in the nominal sizes DN 50 – DN 200
• up to 90° bends
•  2 dimensional change
• Wall thickness approx. 3.5 mm
• Hot curing with water (up to 70°C) and steam*

*with suitable calibration hose.

lineTec ProFlex

lineTEC ProFlex

The liner for domestic pipes and Inhouse rehabilitation

• Flexible Hightex Fiber
• Available in the nominal sizes DN 70 – DN 250
• up to 90° bends
•  2  dimensional changes
• Good longitudinal stability
• Wall thickness 4.5 mm (ProFlex) / 6 mm (ProFlex XT)
• Hot curing with water (up to 70°C) and steam*

*with suitable calibration hose.

DiBt
lineTEC ProFlex DIBt Z-42.3-416
IKT

Resin

lineTEC EP 70 resin + 70 HT hardener

Application: Inhouse and Domestic Pipe Rehabilitation with higher thermal load

DIBt: Z-42. 3-530
Mixing ration: 100/20
Processing time: 55 Min (15°C)
Curing time: 20°C 27 h / 55° 150 min. / 70° 50 min.*
HDT: 93,5°C

*When installing the liner please note the curing times in the
installation manual.

Calibration

lineTEC Calibration hose lila

For bends and dimensional changes*

• 46 – 200 mm 1.8’ – 8’
• Extra flexible PVC coated nylon fabric, welded, temperature resistance up to 50°C
• Up to 0.5 bar

* Use the calibration hose in the size of the biggest pipe dimension.

lineTEC Calibration hose light blue

For bends and dimensional changes*

• 100 – 200 mm 4’ – 8 ‘
• Flexible PVC coated nylon fabric, welded
• Temperature resistance up to 50°C, up to 0.5 bar

*Use the calibration hose in the size of the biggest pipe dimension.

lineTEC Calibration hose orange

For higher temperatures

• 100 – 250 mm 4’ – 10‘
• PVC coated Nylon
• welded and sewed
• temperature resistance up to 70°C, up to 1 bar

Installation Aids

lineTEC Preliner HDPE

Against pushing ground water

  • 100 – 600 mm 4 – 24’
  • HDPE Foil 0.1 mm
  • Temperature resistance up to 80°C